From: RSiddappa@xxxxxxxxxx
Date: Wed Mar 13 2002 - 23:04:14 GMT-3
But whne u do
Show Dialer I see the call was intited becuse of the snapshot. So, it means
that it is not because of routing protocol.
I guess.
R.
-----Original Message-----
From: John Neiberger [mailto:neiby@ureach.com]
Sent: Wednesday, March 13, 2002 5:47 PM
To: DAN DORTON; ccielab@groupstudy.com; mm1343@pbi.net
Subject: Re: RE: Snapshot stays active all the time
If your routing protocol is permitted in the dialer list,
wouldn't it be continually resetting the idle timeout?
Hmm... Add one more thing to the list of things I need to brush
up on real soon. :-)
John
---- On Wed, 13 Mar 2002, DAN DORTON (DHSTS68@dhs.state.il.us)
wrote:
> Yes,
>
> I ran across a similar issue & my good buddy Morris busted me
out on it.
>
> I couldn't figure out for the life of me why my snapshot kept
going down
> & coming back up.
>
> He kept saying your snapshots broke & I kept saying... Nope!
Configured
> just like the CD says!
>
> Turns out I had a dialer idle-timeout of 20 seconds left in
there.
>
> Needless to say snapshot didn't have enough time to do it's
job & had to
> try again.... & again... & again... So on & so forth...
>
> So once again I looked like a fool! *sigh*
>
> Damn snapshot!
>
> Dan
>
> >>> "MOLINA, MARTIN J *Internet* (PBI)" <mm1343@pbi.net>
03/13/02
> 12:45PM >>>
> It appears as if I didn't configure the "idle-timeout" to be
long
> enough. I
> bumped it up to 500 and my issue went away.
>
> > -----Original Message-----
> > From: MOLINA, MARTIN J *Internet* (PBI)
> > Sent: Wednesday, March 13, 2002 10:32 AM
> > To: 'ccielab@groupstudy.com'
> > Subject: Snapshot stays active all the time
> >
> > Group,
> > I am running IGRP and I'm using physical BRI interface
configs for
> > Snapshot routing (5mins active, 8mins quiet). See config
briefs below.
> > Anybody know what I have done wrong? Right before snapshot
makes the
> > transition from active to quiet the client initiates
another call and
> the
> > active process is restarted. Thanks in advance.
> >
> > interface BRI0/0
> > ip address 10.1.1.2 255.255.255.0
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer idle-timeout 110
> > dialer map snapshot 1 name R3 broadcast 8358661
> > dialer map ip 10.1.1.3 name R3 broadcast 8358661
> > dialer map ip 10.1.1.3 name R3 broadcast 8358663
> > dialer load-threshold 1 either
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866201 8358662
> > isdn spid2 0835866401 8358664
> > snapshot client 5 8 suppress-statechange-update dialer
> > ppp authentication chap callin
> > ppp chap hostname marty
> > ppp multilink
> >
> > --------------------------------------------------
> > interface BRI0
> > ip address 10.1.1.3 255.255.255.0
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer idle-timeout 110
> > dialer map ip 10.1.1.2 name marty broadcast
> > dialer load-threshold 1 either
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866101 8358661
> > isdn spid2 0835866301 8358663
> > snapshot server 5
> > ppp authentication chap
> > ppp multilink
> >
> > Martin Molina
> > Senior Network Engineer
> > Pacific Bell Internet Services
> > CCNP CCDP
> > desk: 925 973-7774
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:04 GMT-3