From: MOLINA, MARTIN J *Internet* (PBI) (mm1343@xxxxxxx)
Date: Wed Mar 13 2002 - 15:31:34 GMT-3
Group,
I am running IGRP and I'm using physical BRI interface configs for Snapshot
routing (5mins active, 8mins quiet). See config briefs below. Anybody know
what I have done wrong? Right before snapshot makes the transition from
active to quiet the client initiates another call and the active process is
restarted. Thanks in advance.
interface BRI0/0
ip address 10.1.1.2 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer idle-timeout 110
dialer map snapshot 1 name R3 broadcast 8358661
dialer map ip 10.1.1.3 name R3 broadcast 8358661
dialer map ip 10.1.1.3 name R3 broadcast 8358663
dialer load-threshold 1 either
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866201 8358662
isdn spid2 0835866401 8358664
snapshot client 5 8 suppress-statechange-update dialer
ppp authentication chap callin
ppp chap hostname marty
ppp multilink
--------------------------------------------------
interface BRI0
ip address 10.1.1.3 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer idle-timeout 110
dialer map ip 10.1.1.2 name marty broadcast
dialer load-threshold 1 either
dialer-group 1
isdn switch-type basic-ni
isdn spid1 0835866101 8358661
isdn spid2 0835866301 8358663
snapshot server 5
ppp authentication chap
ppp multilink
Martin Molina
Senior Network Engineer
Pacific Bell Internet Services
CCNP CCDP
desk: 925 973-7774
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:03 GMT-3