From: Bhisham Bajaj (bhishambajaj@xxxxxxxxx)
Date: Wed Mar 13 2002 - 16:09:00 GMT-3
try it without this command
dialer map ip 10.1.1.3 name R3 broadcast 8358663
u must have only one dialer map ip ........
on the bri int
it will make two call with the same number
and ppp multilink will aslo work
BB
--- "MOLINA, MARTIN J *Internet* (PBI)"
<mm1343@pbi.net> wrote:
> Group,
> I am running IGRP and I'm using physical BRI
> interface configs for Snapshot
> routing (5mins active, 8mins quiet). See config
> briefs below. Anybody know
> what I have done wrong? Right before snapshot makes
> the transition from
> active to quiet the client initiates another call
> and the active process is
> restarted. Thanks in advance.
>
> interface BRI0/0
> ip address 10.1.1.2 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 110
> dialer map snapshot 1 name R3 broadcast 8358661
> dialer map ip 10.1.1.3 name R3 broadcast 8358661
> dialer map ip 10.1.1.3 name R3 broadcast 8358663
> dialer load-threshold 1 either
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866201 8358662
> isdn spid2 0835866401 8358664
> snapshot client 5 8 suppress-statechange-update
> dialer
> ppp authentication chap callin
> ppp chap hostname marty
> ppp multilink
>
> --------------------------------------------------
> interface BRI0
> ip address 10.1.1.3 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 110
> dialer map ip 10.1.1.2 name marty broadcast
> dialer load-threshold 1 either
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866101 8358661
> isdn spid2 0835866301 8358663
> snapshot server 5
> ppp authentication chap
> ppp multilink
>
> Martin Molina
> Senior Network Engineer
> Pacific Bell Internet Services
> CCNP CCDP
> desk: 925 973-7774
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:03 GMT-3