From: kenairs (kenairs@xxxxxxxxxxx)
Date: Tue Mar 12 2002 - 12:13:19 GMT-3
Hi ,
>From the Cisco CD , is states the below
When the route reflector receives an advertised route, depending on the
neighbor, it does the following:
a.. A route from an external BGP speaker is advertised to all clients and
nonclient peers.
b.. A route from a nonclient peer is advertised to all clients.
c.. A route from a client is advertised to all clients and nonclient peers.
Hence, the clients need not be fully meshed.
Here is my topology,
R1
| |
| |
| |
R2 R3
All routers are able to reach each other through IGP ( eigrp ) . R1 is the RR
R2 and R3 is the client.
Now, R2 has a E0 . It then have a network command under BGP and is propagrate
to R1.
But R1 does not advertised the route to R3 ..
Why is this so ?
All routers are syn enabled.
but is R2 received a route from another AS, the route will be advertised to
R3.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:01 GMT-3