RE: RE: Ripv2 and OSPF issues

From: armreg@xxxxxxxxxxxx
Date: Mon Mar 11 2002 - 12:24:52 GMT-3

• Next message: MADMAN: "Re: Frame Zero CIR"
• Previous message: Jaroslaw Zak: "Re: Some confusion in frame-relay map-class"
• Maybe in reply to: Chua, Parry: "RE: Ripv2 and OSPF issues"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Thank You Guys,

I had created routing loops, when I did the redistribution among the different
protocols. After I fixed started to work.

Thanks

Antonio.

"Chua, Parry" <Parry.Chua@compaq.com> wrote:

>Hi,
>
>Can I assume that R8/R7/R5 are running RIP v2 ?
>Only R5 is running OSPF, right ?
>
>If the above is true, you are NOT doing any reditrbution from OSPF to RIP base
d on your
>routing table of R5/R7.(Ie in R7, yu only see the routes that source from R5 R
IP)
>
>>R7#sh ip Route
>>R 170.100.13.0/28 [120/1] via 170.100.42.241, 00:00:01,FastEthernet0/0
>>R 170.100.2.0/24 [120/1] via 170.100.42.241, 00:00:01, FastEthernet0/0
>>R 170.100.1.0/24 [120/1] via 170.100.42.241, 00:00:01, FastEthernet0/0
>
>Regards
>Parry Chua
>

--

• Next message: MADMAN: "Re: Frame Zero CIR"
• Previous message: Jaroslaw Zak: "Re: Some confusion in frame-relay map-class"
• Maybe in reply to: Chua, Parry: "RE: Ripv2 and OSPF issues"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:00 GMT-3