From: jeff Szeto (jytszeto@xxxxxxxxxxx)
Date: Wed Mar 06 2002 - 03:32:00 GMT-3
Hi Experts,
I have no 3920 switch and hope to know how to configure the 3920.
The setting is:
Ring 1------to1--R1--s1-----------------s2--R2--to2---------Ring 2
R1 and R2 are attached to the port 1 and port 2 of the 3920 respectively.
Suppose I have configured the DLSW part and want to configure the 3920
switch.
Here is what I will do,
1. set two trbrf, namely, trbrf1 and trbrf2, then assign vlan 1 and 2 to them
respectively
2. set two trcrf, namely, trcrf1 and trcrf2, then assign vlan 10 and 20 to
them
also assign appropiate the appropiate parent trbrf.(trbrf1--trcrf1,
trbrf2--trcrf2)
3. set the trcrf 1 to ring 1 and the trcrf2 to ring 2, using SRB
4. assign port 1 to trcrf1 and port 2 to trcrf2
Am I miss something?
Thank you in advance.
Jeff
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:54 GMT-3