From: Lionel Florit (lflorit@xxxxxxxxx)
Date: Wed Mar 06 2002 - 03:16:37 GMT-3
Jason,
if they say use direct encapsulation, then use direct encapsulation. Per
the url you sent me, ethernet to token ring should work since 12.0 (I
didn't know) therefore it'll work in the lab (without using lite).
Lionel
At 05:50 PM 3/6/2002 +1100, Jason Sinclair wrote:
>Lionel,
>
>Further to this, in the lab if they ask you to configure DLSW direct encaps
>from ether to token ring you would need to use lite - correct?
>
>Cheers,
>
>Jason Sinclair
>Manager, Network Support Group
>POWERTEL
>Ground Level, 55 Clarence Street,
>SYDNEY NSW 2000
>AUSTRALIA
>office: + 61 2 8264 3820
>mobile: + 61 416 105 858
>* sinclairj@powertel.com.au
>
>
>
> -----Original Message-----
> From: Lionel Florit [mailto:lflorit@cisco.com]
> Sent: Wednesday, 6 March 2002 15:31
> To: Jason Sinclair
> Cc: 'ccielab@groupstudy.com'
> Subject: Re: DLSW issue
>
> Jason,
>
> DLSw direct will have DLSw encapsulated directly over frame
>relay or
> hdlc. It's only supported on token ring to token ring
>connections. All
> keep alive go through end to end. it's not a reliable
>transport. Queuing is
> also problem
>
> DLSw Lite rides over LLC2 as you mentioned. It provides
>reliable transport
> and is not limited to token ring to token ring connections
>(also supports
> ethernet, SDLC, QLLC end systems)
>
> configuration of both is very similar except you omit the
>"pass-through"
> keyword for DLSw lite.
>
> Lionel
>
> At 11:44 AM 3/6/2002 +1100, Jason Sinclair wrote:
> >All,
> >
> >Can someone please explain what defines the difference
>between DLSW Direct
> >encaps and DLSW lite. I believe that DIRECT is where you
>use DLSW as the
> >transport and thus need pass-thru and the statement
>frame-relay map dlsw
> >dlci. Whereas with lite you use frame-map llc2 dlci and do
>not use
> >pass-thru. I am having problems with direct with pass-thru
>and have raised a
> >TAC case.
> >
> >Any ideas?
> >
> >Jason Sinclair
> >Manager, Network Support Group
> >POWERTEL
> >Ground Level, 55 Clarence Street,
> >SYDNEY NSW 2000
> >AUSTRALIA
> >office: + 61 2 8264 3820
> >mobile: + 61 416 105 858
> >* sinclairj@powertel.com.au
> >
> >
> >
> >
>
> >**********************************************************************
> >PowerTel Limited, winners of
> >Broadband Wholesale Carrier of the year, CommsWorld
>Telecomms Awards 2001
> >Best Emerging Telco, Australian Telecom Awards 2001
> >
>
> >**********************************************************************
> >This email (including all attachments) is intended solely
>for the named
> >addressee. It is confidential and may contain commercially
>sensitive
> >information. If you receive it in error, please let us know
>by reply email,
> >delete it from your system and destroy any copies.
> >
> >This email is also subject to copyright. No part of it
>should be reproduced,
> >adapted or transmitted without the prior written consent of
>the copyright
> >owner.
> >
> >Emails may be interfered with, may contain computer viruses
>or other defects
> >and may not be successfully replicated on other systems. We
>give no
> >warranties in relation to these matters. If you have any
>doubts about
> >the authenticity of an email purportedly sent by us, please
>contact us
> >immediately.
> >
>
> >**********************************************************************
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:54 GMT-3