From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Tue Mar 05 2002 - 07:14:49 GMT-3
backup load
depending on the routing protocol you may need to configure the extra bit to
carry 1/3 of traffic (i havent seen this lab, but the command mentioned
above should help u start)
hth
Nick
----- Original Message -----
From: "Alex Hsieh" <ccie21@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, March 05, 2002 6:04 PM
Subject: isdn backup
> I am doing fatkid lab 505,on isdn section,it states "The dial-up line
> between R2 and R3 should also be brought up if the serial line between R3
> and R5 exceeds 50% utilization. In this case the line should handle 1/3
of
> the traffic from R3"
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Whats the command used to configure this task?I cant seem to find answer
on
> solution page.Thanks.
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:53 GMT-3