From: ccie2002@xxxxxxxxxxxxx
Date: Mon Mar 04 2002 - 03:00:14 GMT-3
Hello all:
I am trying to upgrade my Cisco 4000 from 8 meg to
16 meg flash. When I install the etra 8 meg into
the router, my router boots up in boot mode and
when I do a show flash I recieve the error message
"device not programmable". Does anyone know how I can
solve this.
I asked a few people at my job and nothing works.
Tried changing the config-register to 0x2101 and 0x101.
Also was told to do a format flash. This command does
not work on 12.2 IOS on my Cisco 4000. Someone else
advised me to try changing J4 and J6 jumpers on the motherboard. Tried that and
this did not work.
However, I really did not know what I was doing.
Any suggestion. I checked the archives on groupstudy
but I could not find a solution.
David
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:52 GMT-3