From: Steven Weber (itweber@xxxxxxxxxxxxx)
Date: Mon Mar 04 2002 - 12:22:33 GMT-3
it means that the flash is corrupted, I have the same problem on my 4000,
it's running 12.0 IP and it looks like it's stuck that way till I can get a
hold of a new daughter card, till them I load the new images off tftp.
HTH
Steve
----- Original Message -----
From: <ccie2002@bellsouth.net>
To: <ccielab@groupstudy.com>
Sent: Monday, March 04, 2002 1:00 AM
Subject: Device not programmable on Cisco 4000
> Hello all:
>
> I am trying to upgrade my Cisco 4000 from 8 meg to
> 16 meg flash. When I install the etra 8 meg into
> the router, my router boots up in boot mode and
> when I do a show flash I recieve the error message
> "device not programmable". Does anyone know how I can
> solve this.
>
> I asked a few people at my job and nothing works.
> Tried changing the config-register to 0x2101 and 0x101.
> Also was told to do a format flash. This command does
> not work on 12.2 IOS on my Cisco 4000. Someone else
> advised me to try changing J4 and J6 jumpers on the motherboard. Tried
that and this did not work.
> However, I really did not know what I was doing.
>
> Any suggestion. I checked the archives on groupstudy
> but I could not find a solution.
>
>
> David
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:52 GMT-3