From: Raj (raj_lab@xxxxxxxxx)
Date: Sun Mar 03 2002 - 16:08:13 GMT-3
Try to Pu the Multiring IP on the R3 routers ethrnet and see. It shousl
work.
Raj.
----- Original Message -----
From: "Anand Ghody" <vze2hq65@verizon.net>
To: "alain faure" <alainfaure@yahoo.fr>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, March 03, 2002 12:13 PM
Subject: Re: translational bridging driving be nuts!!!
> Tried that already, does not work (multiring ipon all token ring
> interfaces and only on r4's token ring interface). The fun thing is
> that I setup the cat 3900 with an ip address, 172.16.3.5/24 ( on the
> same subnet). I can see its arp request for 172.16.3.1 (r1) on the
> ethernet interface of (r3) 172.16.3.2 when I run debug arp. I just
> can't ping from 172.16.3.2 to 172.16.3.1.
>
> and in response to the first post I think you meant multiring ip in the
> token ring interface of r4. and as answered above that does not do the
> trick
>
> alain faure wrote:
>
> >Hi,
> >
> >Is it necessary to put a multiring all on the token ring interface for
this
> >case ?
> >
> >Best regards
> >
> > --- Anand Ghody <vze2hq65@verizon.net> a icrit : > Alright, I have no
idea why
> >this is not working and need help. I
> >
> >>checked previous posts and made some adjustments but it still does not
> >>work Need help!!!
> >>
> >>heres the setup
> >>
> >>r3 (e0, 172.16.3.2) -> catalyst 5505 port 2/2 -> catalyst 5505 port
2/1 ->
> >> r4 (e0) -> r4 (to0) -> cat 3900 port 1 ->cat 3900 port 6 -> r1 (to0,
> >>172.16.3.1)
> >>
> >>
> >>I have disable ip routing on r4 and also setup bridge 1 bitswap-layer3
> >>address
> >>
> >>the ports on the cataylst 5500 are on the same vlan
> >>the port on the cataylst 3900 are also in the same vlan and setup for
srt
> >>
> >>If I but an ip address on r4 token ring I can ping it from r1
> >>
> >>I'll past the configs to make it easier
> >>
> >>
> >>r3 config
> >>!
> >>interface Ethernet0
> >> ip address 172.16.3.2 255.255.255.0
> >>
> >>|
> >>connnects to catalyst 5500
> >>|
> >>
> >>r4 config
> >>no ip routing
> >>no ip finger
> >>!
> >>!
> >>source-bridge ring-group 100
> >>source-bridge transparent 100 3 2 1
> >>!
> >>!
> >>interface Ethernet0
> >> no ip address
> >> no ip route-cache
> >> bridge-group 1
> >>!
> >>interface Serial0
> >> no ip address
> >> no ip route-cache
> >> shutdown
> >>!
> >>interface Serial1
> >> no ip address
> >> no ip route-cache
> >> shutdown
> >>!
> >>interface TokenRing0
> >> no ip address
> >> no ip route-cache
> >> ring-speed 16
> >> source-bridge 1 2 100
> >>!
> >>ip classless
> >>no ip http server
> >>!
> >>bridge 1 protocol ieee
> >>bridge 1 bitswap-layer3-addresses
> >>!
> >>
> >>|
> >>connects to catalyst 3900
> >>|
> >>
> >>r1 config
> >>!
> >>interface TokenRing0
> >> ip address 172.16.3.1 255.255.255.0
> >> ring-speed 16
> >>
> >>
> >>
> >>
> >>.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:51 GMT-3