From: Anand Ghody (vze2hq65@xxxxxxxxxxx)
Date: Sun Mar 03 2002 - 18:01:41 GMT-3
How? its not an option.
below is r3
lone_rhino(config)#int e0
lone_rhino(config-if)#m?
mac-address max-reserved-bandwidth media-type mtu multilink-group
Raj wrote:
>Try to Pu the Multiring IP on the R3 routers ethrnet and see. It shousl
>work.
>
>Raj.
>----- Original Message -----
>From: "Anand Ghody" <vze2hq65@verizon.net>
>To: "alain faure" <alainfaure@yahoo.fr>
>Cc: <ccielab@groupstudy.com>
>Sent: Sunday, March 03, 2002 12:13 PM
>Subject: Re: translational bridging driving be nuts!!!
>
>
>>Tried that already, does not work (multiring ipon all token ring
>>interfaces and only on r4's token ring interface). The fun thing is
>>that I setup the cat 3900 with an ip address, 172.16.3.5/24 ( on the
>>same subnet). I can see its arp request for 172.16.3.1 (r1) on the
>>ethernet interface of (r3) 172.16.3.2 when I run debug arp. I just
>>can't ping from 172.16.3.2 to 172.16.3.1.
>>
>>and in response to the first post I think you meant multiring ip in the
>>token ring interface of r4. and as answered above that does not do the
>>trick
>>
>>alain faure wrote:
>>
>>>Hi,
>>>
>>>Is it necessary to put a multiring all on the token ring interface for
>>>
>this
>
>>>case ?
>>>
>>>Best regards
>>>
>>>--- Anand Ghody <vze2hq65@verizon.net> a icrit : > Alright, I have no
>>>
>idea why
>
>>>this is not working and need help. I
>>>
>>>>checked previous posts and made some adjustments but it still does not
>>>>work Need help!!!
>>>>
>>>>heres the setup
>>>>
>>>>r3 (e0, 172.16.3.2) -> catalyst 5505 port 2/2 -> catalyst 5505 port
>>>>
>2/1 ->
>
>>>>r4 (e0) -> r4 (to0) -> cat 3900 port 1 ->cat 3900 port 6 -> r1 (to0,
>>>>172.16.3.1)
>>>>
>>>>
>>>>I have disable ip routing on r4 and also setup bridge 1 bitswap-layer3
>>>>address
>>>>
>>>>the ports on the cataylst 5500 are on the same vlan
>>>>the port on the cataylst 3900 are also in the same vlan and setup for
>>>>
>srt
>
>>>>If I but an ip address on r4 token ring I can ping it from r1
>>>>
>>>>I'll past the configs to make it easier
>>>>
>>>>
>>>>r3 config
>>>>!
>>>>interface Ethernet0
>>>>ip address 172.16.3.2 255.255.255.0
>>>>
>>>>|
>>>>connnects to catalyst 5500
>>>>|
>>>>
>>>>r4 config
>>>>no ip routing
>>>>no ip finger
>>>>!
>>>>!
>>>>source-bridge ring-group 100
>>>>source-bridge transparent 100 3 2 1
>>>>!
>>>>!
>>>>interface Ethernet0
>>>>no ip address
>>>>no ip route-cache
>>>>bridge-group 1
>>>>!
>>>>interface Serial0
>>>>no ip address
>>>>no ip route-cache
>>>>shutdown
>>>>!
>>>>interface Serial1
>>>>no ip address
>>>>no ip route-cache
>>>>shutdown
>>>>!
>>>>interface TokenRing0
>>>>no ip address
>>>>no ip route-cache
>>>>ring-speed 16
>>>>source-bridge 1 2 100
>>>>!
>>>>ip classless
>>>>no ip http server
>>>>!
>>>>bridge 1 protocol ieee
>>>>bridge 1 bitswap-layer3-addresses
>>>>!
>>>>
>>>>|
>>>>connects to catalyst 3900
>>>>|
>>>>
>>>>r1 config
>>>>!
>>>>interface TokenRing0
>>>>ip address 172.16.3.1 255.255.255.0
>>>>ring-speed 16
>>>>
>>>>
>>>>
>>>>
>>>>.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:51 GMT-3