From: Anand Ghody (vze2hq65@xxxxxxxxxxx)
Date: Sun Mar 03 2002 - 15:13:38 GMT-3
Tried that already, does not work (multiring ipon all token ring
interfaces and only on r4's token ring interface). The fun thing is
that I setup the cat 3900 with an ip address, 172.16.3.5/24 ( on the
same subnet). I can see its arp request for 172.16.3.1 (r1) on the
ethernet interface of (r3) 172.16.3.2 when I run debug arp. I just
can't ping from 172.16.3.2 to 172.16.3.1.
and in response to the first post I think you meant multiring ip in the
token ring interface of r4. and as answered above that does not do the
trick
alain faure wrote:
>Hi,
>
>Is it necessary to put a multiring all on the token ring interface for this
>case ?
>
>Best regards
>
> --- Anand Ghody <vze2hq65@verizon.net> a icrit : > Alright, I have no idea wh
y
>this is not working and need help. I
>
>>checked previous posts and made some adjustments but it still does not
>>work Need help!!!
>>
>>heres the setup
>>
>>r3 (e0, 172.16.3.2) -> catalyst 5505 port 2/2 -> catalyst 5505 port 2/1 ->
>> r4 (e0) -> r4 (to0) -> cat 3900 port 1 ->cat 3900 port 6 -> r1 (to0,
>>172.16.3.1)
>>
>>
>>I have disable ip routing on r4 and also setup bridge 1 bitswap-layer3
>>address
>>
>>the ports on the cataylst 5500 are on the same vlan
>>the port on the cataylst 3900 are also in the same vlan and setup for srt
>>
>>If I but an ip address on r4 token ring I can ping it from r1
>>
>>I'll past the configs to make it easier
>>
>>
>>r3 config
>>!
>>interface Ethernet0
>> ip address 172.16.3.2 255.255.255.0
>>
>>|
>>connnects to catalyst 5500
>>|
>>
>>r4 config
>>no ip routing
>>no ip finger
>>!
>>!
>>source-bridge ring-group 100
>>source-bridge transparent 100 3 2 1
>>!
>>!
>>interface Ethernet0
>> no ip address
>> no ip route-cache
>> bridge-group 1
>>!
>>interface Serial0
>> no ip address
>> no ip route-cache
>> shutdown
>>!
>>interface Serial1
>> no ip address
>> no ip route-cache
>> shutdown
>>!
>>interface TokenRing0
>> no ip address
>> no ip route-cache
>> ring-speed 16
>> source-bridge 1 2 100
>>!
>>ip classless
>>no ip http server
>>!
>>bridge 1 protocol ieee
>>bridge 1 bitswap-layer3-addresses
>>!
>>
>>|
>>connects to catalyst 3900
>>|
>>
>>r1 config
>>!
>>interface TokenRing0
>> ip address 172.16.3.1 255.255.255.0
>> ring-speed 16
>>
>>
>>
>>
>>.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:51 GMT-3