From: alain faure (alainfaure@xxxxxxxx)
Date: Sun Mar 03 2002 - 15:11:35 GMT-3
Hi,
For some applications on a bank network, it is necessary to put on the link (a
frame relay one 128kbps, CIR 32 kbps). RTP priority for voice and Wred for some
other applications who need it.
The frame relay use physical interface on the spoke. One Point-to-multipoint
sub-interface at the central router by PVC (yes one by DLCI/PVC).
I already defined a class map on both type of interface.
rtp priority is in the class-map.
The question is :
How can i put WRED to deal with the application on that ?
(for spoke and hub router)
(spoke) config :
interface Serial0
ip address .......4 255.255.255.0
encapsulation frame-relay
frame-relay class FRSHINT
frame-relay map ip .......2 21 broadcast
no frame-relay inverse-arp
frame-relay lmi-type ansi
map-class frame-relay FRSHINT
frame-relay cir 64000
frame-relay bc 8000
frame-relay be 128000
frame-relay mincir 32000
frame-relay adaptive-shaping becn
frame-relay fair-queue
frame-relay ip rtp priority 16384 16383 25
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:51 GMT-3