From: alain faure (alainfaure@xxxxxxxx)
Date: Sun Mar 03 2002 - 14:53:36 GMT-3
Hi,
Is it necessary to put a multiring all on the token ring interface for this
case ?
Best regards
--- Anand Ghody <vze2hq65@verizon.net> a icrit : > Alright, I have no idea why
this is not working and need help. I
> checked previous posts and made some adjustments but it still does not
> work Need help!!!
>
> heres the setup
>
> r3 (e0, 172.16.3.2) -> catalyst 5505 port 2/2 -> catalyst 5505 port 2/1 ->
> r4 (e0) -> r4 (to0) -> cat 3900 port 1 ->cat 3900 port 6 -> r1 (to0,
> 172.16.3.1)
>
>
> I have disable ip routing on r4 and also setup bridge 1 bitswap-layer3
> address
>
> the ports on the cataylst 5500 are on the same vlan
> the port on the cataylst 3900 are also in the same vlan and setup for srt
>
> If I but an ip address on r4 token ring I can ping it from r1
>
> I'll past the configs to make it easier
>
>
> r3 config
> !
> interface Ethernet0
> ip address 172.16.3.2 255.255.255.0
>
> |
> connnects to catalyst 5500
> |
>
> r4 config
> no ip routing
> no ip finger
> !
> !
> source-bridge ring-group 100
> source-bridge transparent 100 3 2 1
> !
> !
> interface Ethernet0
> no ip address
> no ip route-cache
> bridge-group 1
> !
> interface Serial0
> no ip address
> no ip route-cache
> shutdown
> !
> interface Serial1
> no ip address
> no ip route-cache
> shutdown
> !
> interface TokenRing0
> no ip address
> no ip route-cache
> ring-speed 16
> source-bridge 1 2 100
> !
> ip classless
> no ip http server
> !
> bridge 1 protocol ieee
> bridge 1 bitswap-layer3-addresses
> !
>
> |
> connects to catalyst 3900
> |
>
> r1 config
> !
> interface TokenRing0
> ip address 172.16.3.1 255.255.255.0
> ring-speed 16
>
>
>
>
> .
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:51 GMT-3