From: Bill Greenwood (billgreenwood@xxxxxxxxxxxxx)
Date: Mon Feb 25 2002 - 00:06:59 GMT-3
I believe what you need to to is to set up authentication for the area, but
only define a key on the link between the two that need to use
authentication.
Bill
----- Original Message -----
From: "Jim Newton" <jnewton@InternetNOC.com>
To: "Ccielab" <ccielab@groupstudy.com>
Sent: Sunday, February 24, 2002 9:21 PM
Subject: OSPF authentication
> I am working on a lab with three routers that are part of the same subnet
in
> a point to multipoint frame configuration. The lab is asking for me to set
> up authentication between only two of the routers not all three. Is there
a
> way to set up authentication on only certain devices in an area and not
all
> of them? I have never seen this, so I am wondering if the lab is wrong.
But
> I am the first to admit that there are lots of things out there that I
have
> never seen before.
>
> Jim Newton
> Network Engineer
> iNOC Inc
> jnewton@internetnoc.com
> work 608-663-4555
> cell 608-516-6068
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:33 GMT-3