From: Bill Greenwood (billgreenwood@xxxxxxxxxxxxx)
Date: Mon Feb 25 2002 - 00:10:35 GMT-3
Boy I wish I had that one back. You will have to set up authentication AND
KEYs on all three. The Lab is just messing with you. Since they are part
of the same network all will have to authenticate on all.
Now if they where different network in the same area my first answer would
apply.
Bill
----- Original Message -----
From: "Jim Newton" <jnewton@InternetNOC.com>
To: "Ccielab" <ccielab@groupstudy.com>
Sent: Sunday, February 24, 2002 9:21 PM
Subject: OSPF authentication
> I am working on a lab with three routers that are part of the same subnet
in
> a point to multipoint frame configuration. The lab is asking for me to set
> up authentication between only two of the routers not all three. Is there
a
> way to set up authentication on only certain devices in an area and not
all
> of them? I have never seen this, so I am wondering if the lab is wrong.
But
> I am the first to admit that there are lots of things out there that I
have
> never seen before.
>
> Jim Newton
> Network Engineer
> iNOC Inc
> jnewton@internetnoc.com
> work 608-663-4555
> cell 608-516-6068
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:33 GMT-3