Re: ATM BAck to back!

From: Engelhard M. Labiro (engelhard@xxxxxxxxxxxxxx)
Date: Sat Feb 23 2002 - 09:55:56 GMT-3

Next message: Annu Roopa: "RE: Uplinkfast issues"
Previous message: CiscoCCNP3@xxxxxxx: "Re: A MAD router"
Maybe in reply to: Nicolai Gersbo Solling: "ATM BAck to back!"
Next in thread: kym blair: "Re: ATM BAck to back!"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This is simple config that I do on my lab (using IPexpert scenario).
R6 and R9 are connected back to back with a PVC 0/100
Hope you get the idea.

r6
!
interface ATM1/0
ip address 150.50.9.66 255.255.255.252
no atm ilmi-keepalive
pvc 0/100
  protocol ip 150.50.9.65 broadcast
  protocol ip 150.50.9.66 broadcast
  protocol ipx 66.0001.6305.8400 broadcast
  protocol ipx 66.0004.4d6a.73e1 broadcast
  encapsulation aal5snap
!
ipx network 66
!

r9
interface ATM2/0
ip address 150.50.9.65 255.255.255.252
no atm ilmi-keepalive
pvc 0/100
  protocol ip 150.50.9.65 broadcast
  protocol ip 150.50.9.66 broadcast
  protocol ipx 66.0001.6305.8400 broadcast
  protocol ipx 66.0004.4d6a.73e1 broadcast
  encapsulation aal5snap
!
ipx network 66
!

> I have been "lucky" enough to put my hands on a fe 1401's and
>$B!!(BI wan't to
> configure the ATM interfaces to be connected back-to-back...
> Somehow I cannot find information on this on CCO, unless you use
> PPP
> encapsulation!
>
> I just wan't to have basic IP connectivity working...
>
> Any good ideas or docs?

Next message: Annu Roopa: "RE: Uplinkfast issues"
Previous message: CiscoCCNP3@xxxxxxx: "Re: A MAD router"
Maybe in reply to: Nicolai Gersbo Solling: "ATM BAck to back!"
Next in thread: kym blair: "Re: ATM BAck to back!"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3