From: CiscoCCNP3@xxxxxxx
Date: Sat Feb 23 2002 - 09:21:04 GMT-3
hiya,
what i would try is powercycling, and ctrl-break, the 2621 goes to ;
rommon>
then like you were going to do password recovery, bypass the startup config
rommon> confreg 0x2142
after reload, the router will enter the intitial config dialogue, ctrl-c to
bypass that, and you'll have a clean router, reset to the correct baud rate,
and you can reconfigure, set enable pass etc.
HTH
joey r.
ccnp/dp/si
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3