Re: ospf into igrp another router in scenario

From: Lab Candidate (labccie@xxxxxxxxx)
Date: Fri Feb 22 2002 - 19:11:03 GMT-3

Next message: Jefferson, Dave: "RE: Simline2 - does it pass traffic?"
Previous message: Paul Andersen: "Which PIX FW for the Security Lab?"
Maybe in reply to: jim.phillipo@xxxxxxxxxxxx: "ospf into igrp another router in scenario"
Next in thread: Lab Candidate: "RE: ospf into igrp another router in scenario"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

John,

you're right on that. jim, all you need to do is just make s0.1 a p2p subintf a
nd you'll see
10.1.11.0/24 in your rtr8 routing table.

---
--- John Neiberger <neiby@ureach.com> wrote:
> I believe this is what happens when you use the point-to-
> multipoint network type.  If you use a different network type
> the /32 prefixes should go away and you'll see the actual /24.
> Someone with more experience with this than I might be able to
> elaborate.
>
> John
>
>

Next message: Jefferson, Dave: "RE: Simline2 - does it pass traffic?"
Previous message: Paul Andersen: "Which PIX FW for the Security Lab?"
Maybe in reply to: jim.phillipo@xxxxxxxxxxxx: "ospf into igrp another router in scenario"
Next in thread: Lab Candidate: "RE: ospf into igrp another router in scenario"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3