RE: ospf into igrp another router in scenario

From: Lab Candidate (labccie@xxxxxxxxx)
Date: Fri Feb 22 2002 - 19:20:49 GMT-3

• Next message: Paul Jin: "Re: Simline2 - does it pass traffic?"
• Previous message: Peter Dostal: "RE: ISDN BRI and BAP/BACP"
• Maybe in reply to: jim.phillipo@xxxxxxxxxxxx: "ospf into igrp another router in scenario"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Glenn,

That's the way how frame-relay multipoint interface works.

---
--- "Williams, Glenn" <WILLIAMSG@PANASONIC.COM> wrote:
> Because redistribute connected on R14, you should be able to summarize this.
> But I don't know why it shows up as /32 on multipoint.
> GW
>
> -----Original Message-----
> From: John Neiberger [mailto:neiby@ureach.com]
> Sent: Friday, February 22, 2002 1:26 PM
> To: jim.phillipo@guardent.com; ccielab@groupstudy.com
> Subject: Re: ospf into igrp another router in scenario
>
>
> I believe this is what happens when you use the point-to-
> multipoint network type.  If you use a different network type
> the /32 prefixes should go away and you'll see the actual /24.
> Someone with more experience with this than I might be able to
> elaborate.
>
> John
>
>

• Next message: Paul Jin: "Re: Simline2 - does it pass traffic?"
• Previous message: Peter Dostal: "RE: ISDN BRI and BAP/BACP"
• Maybe in reply to: jim.phillipo@xxxxxxxxxxxx: "ospf into igrp another router in scenario"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3