From: Erick B. (erickbe@xxxxxxxxx)
Date: Fri Feb 22 2002 - 17:07:43 GMT-3
Hi,
Put a 'no exec' under the line for the cat5000.
I'm betting that when you power them on together the
5000 sends signal out its port and the 2511
establishes a connection. If you a 'show line' on the
2511 then clear line 2 that should free up the
connection then you should be able to get to it. The
'no exec' prevents inbound traffic from using the
line.
--- Steve Schoeneman <steve@abacast.com> wrote:
> I have searched the archives and can find nothing
> similar. My problem is
> that if I power up my rack at the same time using
> the power strips, I cannot
> reverse telnet to my Cat 5000 getting a "Connection
> refused" message at the
> 2511 terminal. If I power down both units and power
> up the Cat then the 2511
> while the Cat is coming back up I can sometimes
> connect ok, sometimes not. I
> have never had trouble connecting my PC direct to
> the Cat.
>
> Am I missing something really basic here? Below is
> part of the 2511 config.
>
> Thanks in advance.
>
> Steve
>
> ip host r1 2001 10.0.0.1
> ip host cat5000 2002 10.0.0.1
> ip host cat3900 2003 10.0.0.1
> ip host r2 2005 10.0.0.1
> ip host r3 2006 10.0.0.1
> ip host r4 2008 10.0.0.1
> ip host r6 2007 10.0.0.1
> ip host r7 2009 10.0.0.1
>
> line con 0
> transport input none
> line 1
> modem Host
> transport input all
> line 2
> transport input all
> line 3 16
> modem Host
> transport input all
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:30 GMT-3