Re: HELP me: access-list with bgp protocol

From: CiscoCCNP3@xxxxxxx
Date: Fri Feb 22 2002 - 17:07:02 GMT-3

• Next message: Erick B.: "Re: Catalyst 5000 via 2511"
• Previous message: Todd Carswell: "Re: OSPF virtual links"
• Maybe in reply to: jim martin: "HELP me: access-list with bgp protocol"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
hiya,

if this is your current config;

in s 0/0
  ip access-group 140 in
  ip addr 10.10.10.1 255.255.255.0

access-list 140 permit ospf any any
access-list 140 permit tcp any any eq bgp

you might try adding

access-list 140 permit tcp any any gt 1023 established

to allow the return tcp traffic

HTH

joey r

ccnp/dp/si

• Next message: Erick B.: "Re: Catalyst 5000 via 2511"
• Previous message: Todd Carswell: "Re: OSPF virtual links"
• Maybe in reply to: jim martin: "HELP me: access-list with bgp protocol"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:30 GMT-3