From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Thu Feb 21 2002 - 19:23:06 GMT-3
In new codes default route is not redistributed automatically in RIP. u have
to give default information orginate command
-Mamoor
----- Original Message -----
From: George Spahl <georges@iglou.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, February 21, 2002 3:59 AM
Subject: IP RIP default-routing
> Greetings,
>
> I've long been under the impression that by simply adding a static 0/0
> route that RIP would automatically include it in outgoing routing
> updates, however I'm only able to make that happen by "redistributing
> static". (Default information originate works fine also). I've reduced
> it to a very simple config but get the same results. Also, the network
> that the 0/0 route points to is in RIP as well (if that makes a
> difference. Has the behavior changed for this (or maybe never behaved
> this way at all)? Version is 12.1. Didn't expect to get hung up on IP
> RIP...
>
> George
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:29 GMT-3