From: Diehm, Brian (Brian.Diehm@xxxxxxxxxx)
Date: Thu Feb 21 2002 - 17:09:09 GMT-3
Turns out I left out a command.
boot bootldr bootflash:c6msfc2-boot-mz.121-7.E.bin
Thanks for the help,
Brian Diehm, CCIE#8332
-----Original Message-----
From: MADMAN [mailto:dmadlan@qwest.com]
Sent: Thursday, February 21, 2002 2:06 PM
To: Church, Chuck
Cc: Diehm, Brian; 'Ccielab (E-mail)'
Subject: Re: 6500 boot error
Are you booting off of the MSFC bootflash or the sup-slot?? Have you
tried moving the image off of the one and moving it to the other?? You
can also do a "switch console" and force the MSFC into ROMMON then type
boot sup-slot0:filename or whereever it resides.
Dave
"Church, Chuck" wrote:
>
> Yeah, I would guess a bad image or bad flash. I'm assuming you've got
> smartnet on your 6500 with MSFC2 and half a gig of ram, so TAC should
be
> able to help also.
>
> Chuck Church
> Sr. Network Engineer
> CCIE #8776, MCNE, MCSE
> US Tennis Association
> 70 W. Red Oak Lane
> White Plains, NY 10604
> 914-696-7199
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Diehm, Brian
> Sent: Thursday, February 21, 2002 11:07 AM
> To: Ccielab (E-mail)
> Subject: 6500 boot error
>
> I keep getting this boot error when I boot the MSFC card on my sup. It
gives
> me this error and then comes up in boot mode. Any idea what it is? I
am
> thinking maybe I have a bad image.
>
> Self decompressing the image :
>
########################################################################
####
> ####
> ##################################################### [OK]
>
> Currently running ROMMON from S (Gold) region
> %SYS-6-READ_BOOTFILE_FAIL: bootflash: File read failed -- Permission
denied.
>
> %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot
loader.
>
> %Error reading (Permission denied)
> %Error reading (Permission denied)boot of "cisco2-Cat6k-MSFC2" using
boot
> helper "bootflash:c6msfc2-boot-mz.12
> 1-7.E.bin" failed
> error returned: File read failed -- Permission denied
> loadprog: error - on file open
> boot: cannot load "cisco2-Cat6k-MSFC2"
>
> System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1)
> Copyright (c) 2000 by cisco Systems, Inc.
> Cat6k-MSFC2 platform with 524288 Kbytes of main memory
>
> Self decompressing the image :
>
########################################################################
####
> ####
> ##################################################### [OK]
>
> Brian Diehm, CCIE#8332
> Global Data Communications Engineering
> 281-518-8205
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:29 GMT-3