From: MADMAN (dmadlan@xxxxxxxxx)
Date: Thu Feb 21 2002 - 17:38:56 GMT-3
Quick question, why are you using the bootldr command anyway? The
only time I have ever used it is when the boot image is somewhere execpt
in bootflash, i.e. slot0: or you have multiple bootimages:(
Dave
"Diehm, Brian" wrote:
>
> Turns out I left out a command.
>
> boot bootldr bootflash:c6msfc2-boot-mz.121-7.E.bin
>
> Thanks for the help,
>
> Brian Diehm, CCIE#8332
>
> -----Original Message-----
> From: MADMAN [mailto:dmadlan@qwest.com]
> Sent: Thursday, February 21, 2002 2:06 PM
> To: Church, Chuck
> Cc: Diehm, Brian; 'Ccielab (E-mail)'
> Subject: Re: 6500 boot error
>
> Are you booting off of the MSFC bootflash or the sup-slot?? Have you
> tried moving the image off of the one and moving it to the other?? You
> can also do a "switch console" and force the MSFC into ROMMON then type
> boot sup-slot0:filename or whereever it resides.
>
> Dave
>
> "Church, Chuck" wrote:
> >
> > Yeah, I would guess a bad image or bad flash. I'm assuming you've got
> > smartnet on your 6500 with MSFC2 and half a gig of ram, so TAC should
> be
> > able to help also.
> >
> > Chuck Church
> > Sr. Network Engineer
> > CCIE #8776, MCNE, MCSE
> > US Tennis Association
> > 70 W. Red Oak Lane
> > White Plains, NY 10604
> > 914-696-7199
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Diehm, Brian
> > Sent: Thursday, February 21, 2002 11:07 AM
> > To: Ccielab (E-mail)
> > Subject: 6500 boot error
> >
> > I keep getting this boot error when I boot the MSFC card on my sup. It
> gives
> > me this error and then comes up in boot mode. Any idea what it is? I
> am
> > thinking maybe I have a bad image.
> >
> > Self decompressing the image :
> >
> ########################################################################
> ####
> > ####
> > ##################################################### [OK]
> >
> > Currently running ROMMON from S (Gold) region
> > %SYS-6-READ_BOOTFILE_FAIL: bootflash: File read failed -- Permission
> denied.
> >
> > %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot
> loader.
> >
> > %Error reading (Permission denied)
> > %Error reading (Permission denied)boot of "cisco2-Cat6k-MSFC2" using
> boot
> > helper "bootflash:c6msfc2-boot-mz.12
> > 1-7.E.bin" failed
> > error returned: File read failed -- Permission denied
> > loadprog: error - on file open
> > boot: cannot load "cisco2-Cat6k-MSFC2"
> >
> > System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1)
> > Copyright (c) 2000 by cisco Systems, Inc.
> > Cat6k-MSFC2 platform with 524288 Kbytes of main memory
> >
> > Self decompressing the image :
> >
> ########################################################################
> ####
> > ####
> > ##################################################### [OK]
> >
> > Brian Diehm, CCIE#8332
> > Global Data Communications Engineering
> > 281-518-8205
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:29 GMT-3