From: Emmanuel Oppong (e-oppong@xxxxxxxxx)
Date: Wed Feb 13 2002 - 14:32:27 GMT-3
If you are routing and bridging IP, you have to remove the ip address on the
physical interface and place it on the bvi. If you are only routing IP but
routing & bridging IPX, then you don't need IP address on the bvi but need
IPX network on the bvi.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Williams, Glenn
Sent: Wednesday, February 13, 2002 9:10 AM
To: 'ccielab@groupstudy.com'
Subject: IRB
Can someone tell me when I do and do not need an ip address on the BVI
interface when doing IRB.
TIA
GW
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:21 GMT-3