From: kenairs (kenairs@xxxxxxxxxxx)
Date: Mon Feb 11 2002 - 04:55:27 GMT-3
Hi ,
I re-create the setup and add in the command that you mention.
But when i do a ' show dlsw peer ' , R3 has no peer connection to R1 .
How to verify ?
Tks
----- Original Message -----
From: Alex Wong <cciehoper@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Monday, February 11, 2002 3:11 PM
Subject: re: dlsw peer group and filter
> Hi Daniel,
>
> I am not good at DLSw but maybe I can help.
>
> In my understandings, group members will form prom peer with the other
dlsw
> routers no matter whether they are in the same group.
>
> In your case, r3 should have the commnad dlsw local peer xxxx prom
> also specify the sna requirement in dlsw prom-peer-defaults
> lsap-output-list 200
> acc 200 permit 0x0000 0x0d0d
>
> Please correct me if I am wrong.
>
> Thank you.
>
> Alex
>
> >>>Daniel Hong <Daniel.Hong@nec.com.au> 02/11 12:29 pm >>>
> Dlsw Gurus,
>
> I come across this scenario and trying to find the best solution for it.
>
> r4 is the border peer to r2 and r3
> allow only sna from r3 to r1 and r4
>
>
> as r3 is part of the peer group and there is no static peer relation
between
> r3 and r1, how do I apply the lsap list.
>
> thanks in advance
>
> r3
> |
> |
> |
> r2
> ------------------------------r4-------------------------r1
>
> daniel.hong@nec.com.au
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:18 GMT-3