RE: Busy-message

From: Chuck Mason (romason0916@xxxxxxxxxxx)
Date: Mon Feb 11 2002 - 07:15:15 GMT-3

• Next message: sherry huies: "problem between ISL and RIP,IGRP"
• Previous message: kenairs: "Re: dlsw peer group and filter"
• Maybe in reply to: Kang BS: "Busy-message"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
BS,
It looks like you've done it right.
Make sure you are using a "crl-char" that is not in your message. I use x or
z, and rarely have trouble.

r1(config)#ip host r2 140.4.1.1
r1(config)#busy-message r2 x TRY THIS x
r1(config)#

HTH,
Chuck

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Kang
BS
Sent: Monday, February 11, 2002 3:10 PM
To: ccielab@groupstudy.com
Subject: Busy-message

Hi, all

I can't make it on busy-message.
Could you anyone help me?

Below is my configuration for busy-message.

r2#sh run

hostname r2
service hide-telnet-addresses

ip host r6 172.10.1.6
busy-message r6 ^C
failed............^C

r2#r6
Translating "r6"

User Access Verification

Username: kang
% Login invalid

Username: kang
% Login invalid

Username: ccc
% Login invalid

r2#

- ended with no message

Thanks in advance.

BS Kang

• Next message: sherry huies: "problem between ISL and RIP,IGRP"
• Previous message: kenairs: "Re: dlsw peer group and filter"
• Maybe in reply to: Kang BS: "Busy-message"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:18 GMT-3