re: dlsw peer group and filter

From: Alex Wong (cciehoper@xxxxxxxxxxx)
Date: Mon Feb 11 2002 - 04:11:42 GMT-3

• Next message: Brian McGahan: "Re: SNA SAP Filter"
• Previous message: scott mann: "CCIE San Jose Lab Today...."
• Maybe in reply to: Daniel Hong: "dlsw peer group and filter"
• Next in thread: kenairs: "Re: dlsw peer group and filter"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi Daniel,

I am not good at DLSw but maybe I can help.

In my understandings, group members will form prom peer with the other dlsw
routers no matter whether they are in the same group.

In your case, r3 should have the commnad dlsw local peer xxxx prom
also specify the sna requirement in dlsw prom-peer-defaults
lsap-output-list 200
acc 200 permit 0x0000 0x0d0d

Please correct me if I am wrong.

Thank you.

Alex

>>>Daniel Hong <Daniel.Hong@nec.com.au> 02/11 12:29 pm >>>
Dlsw Gurus,

I come across this scenario and trying to find the best solution for it.

r4 is the border peer to r2 and r3
allow only sna from r3 to r1 and r4

as r3 is part of the peer group and there is no static peer relation between
r3 and r1, how do I apply the lsap list.

thanks in advance

                                                                    r3
                                                                     |
                                                                     |
                                                                     |
                                  r2
------------------------------r4-------------------------r1

daniel.hong@nec.com.au

• Next message: Brian McGahan: "Re: SNA SAP Filter"
• Previous message: scott mann: "CCIE San Jose Lab Today...."
• Maybe in reply to: Daniel Hong: "dlsw peer group and filter"
• Next in thread: kenairs: "Re: dlsw peer group and filter"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:18 GMT-3