From: Rthugo1@xxxxxxx
Date: Sat Feb 09 2002 - 14:33:42 GMT-3
In a message dated 2/9/2002 4:49:56 AM Central Standard Time,
j.mittelstaedt@gmx.net writes:
> Subj:frame-relay/ dont loose dynamic entries after a reload PLEASE HELP
> Date:2/9/2002 4:49:56 AM Central Standard Time
> From: j.mittelstaedt@gmx.net (joh)
> Sender: nobody@groupstudy.com
> Reply-to: <A HREF="mailto:j.mittelstaedt@gmx.net">j.mittelstaedt@gmx.net</A>
(joh)
> To: ccielab@groupstudy.com
>
> Try "clear frame-relay-inarp"
Rob H
>
> as we all know...if you have a partial meshed szenario,
> if you make static entries on a spoke for the other spokes
>
> after a reload you should loose the dynamic entrie due to the
> disabling process of the inverse-arp...for this specific protocol
> and this specific dlci....
>
> im my cas...i did the things above....but after a reload the dynamic
> entrz still comes up ...
>
> see > any ideas / verson 12.0.21
>
> R3>otocol on Interface Serial1, changed state to down
> 00:00:30: %FR-5-DLCICHANGE: Interface Serial0 - DLCI 102 state changed
> to ACTIVE
> 00:00:31: %LINK-5-CHANGED: Interface Ethernet0, changed state to
> administratively down
> 00:00:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
> changed state to down
> 00:00:32: %SYS-5-CONFIG_I: Configured from memory by console
> 00:00:33: %SYS-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-D-L), Version 12.0(21), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2001 by cisco Systems, Inc.
> Compiled Mon 31-Dec-01 18:25 by nmasa
> 00:00:33: %LINK-5-CHANGED: Interface Serial1, changed state to
> administratively down
> 00:00:34: %LINK-5-CHANGED: Interface TokenRing0, changed state to
> administratively downena
> R3#
> R3#sho fram
> R3#sho frame-relay map
> Serial0 (up): ip 5.5.5.1 dlci 102(0x66,0x1860), static,
> broadcast,
> CISCO, status defined, active
> Serial0 (up): ip 5.5.5.4 dlci 102(0x66,0x1860), static,
> broadcast,
> CISCO, status defined, active
> R3#sho frame-relay map
> !!!!!!!!!!!!! after 1 minute
> Serial0 (up): ip 5.5.5.1 dlci 102(0x66,0x1860), static,
> broadcast,
> CISCO, status defined, active
> Serial0 (up): ip 5.5.5.2 dlci 102(0x66,0x1860), dynamic,
> broadcast,, status defined, active
> Serial0 (up): ip 5.5.5.4 dlci 102(0x66,0x1860), static,
> broadcast,
> CISCO, status defined, activePrecedence: bulk
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:17 GMT-3