From: Chua, Parry (Parry.Chua@xxxxxxxxxx)
Date: Fri Feb 08 2002 - 23:12:08 GMT-3
First, you examine the R6 routing table to reach R2/R4 Token ring
network, then you can
either change the AD of OSPF lower than EIGRP or EIGRP higer than OSPF
to reach that network. But care nust be taken to ensure that there is no
routing loop as you are introduce maunual routing decision.
Regards
Parry
-----Original Message-----
From: Arthur Chan [mailto:chanmanlan2002@yahoo.com]
Sent: Saturday, February 09, 2002 9:09 AM
To: ccielab@groupstudy.com
Subject: Prefer OSPF learned route over EIGRP
Topology:
|
F/R Serial |tok ring 200(runs OSPF)
R3-------|--------R6
| |eth
| F/R Ser |
R4------- R2
|--------| tok ring 100
Connections b/t R3,R4, R6, R2-R4 tok ring, and R6 tok
ring 200 runs OSPF. R2-R6 eth and R2-R4 F/R Ser runs
EIGRP.
How does one prefer an OSPF learned route over EIGRP?
For example R6's tok ring 200 attached clients would
like to take the path from R6 via R4(running OSPF) to
reach tok ring 100, instead of R6 via R2(running
EIGRP).
Thanks,
Art
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:16 GMT-3