From: McCallum, Robert (Robert.McCallum@xxxxxxxxxxxxxxxxxx)
Date: Wed Feb 06 2002 - 09:55:43 GMT-3
direct encapsulation with pass-thru has GOT to be on the major interface with d
lsw mapped to a dlci. For direct encapsulation without pass-thru it doesn't ma
tter - so long as you map llc2 to a dlci
-----Original Message-----
From: Binh Co ONG [mailto:ongbinhco@hotmail.com]
Sent: 06 February 2002 10:53
To: mamoor@ieee.org; BAUERR@toysrus.com; ccielab@groupstudy.com
Subject: Re: dlsw on frame
I had a Peer-Problem with dlsw over Frame when i used point-to-multipoint
subinterface. dlsw debug said "encap failed" even i had a "frame-relay map
dlsw". It worked then on the main interface.
Maybe this can help you
Binh Co
>From: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
>Reply-To: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
>To: "Bauer, Rick" <BAUERR@toysrus.com>, <ccielab@groupstudy.com>
>Subject: Re: dlsw on frame
>Date: Wed, 6 Feb 2002 09:20:04 +0500
>
>in my opinion if using llc then do a dynamic on ends, if doing dlsw then
>nail down or use promestic (sorry for spelling)
>
>-Mamoor
>
>
>----- Original Message -----
>From: Bauer, Rick <BAUERR@toysrus.com>
>To: <ccielab@groupstudy.com>
>Sent: Wednesday, February 06, 2002 1:05 AM
>Subject: RE: dlsw on frame
>
>
> > If memory serves me, in order to use direct encapsulation with pass-thru
>you
> > have to have token ring interfaces on both sides of the frame relay
>link.
> >
> > -----Original Message-----
> > From: Sandro Ciffali [mailto:sandyccie@yahoo.com]
> > Sent: Tuesday, February 05, 2002 2:49 PM
> > To: ccielab@groupstudy.com
> > Subject: dlsw on frame
> >
> >
> > group,
> > I have two conflicting doc. from cisco,
> > One says to configure DLSW direct encapsulation using
> > frame-relay with the end to end ack., i need to map
> > "frame-relay map dlsw", The other doc. says map llc2,
> > I remember correctly doing frame-relay map llc2 for
> > local ack. and I know for sure that we use frame-relay
> > map dlsw for the end to end ack. Can someone confirm
> > that for me?
> >
> > Also i am trying to simulate direct encap for DLSW
> > with end to end ack. I used frame map dlsw for the
> > same and my peer does not come up. Has some one done
> > this before, Can some one pls. point me in the right
> > direction pls.
> >
> > thanks
> > Sandro
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:13 GMT-3