From: Tom Holloway (Tom_holloway@xxxxxxxxxxxxxx)
Date: Mon Feb 04 2002 - 14:29:45 GMT-3
For this you need a rj11 to bt600 adapter with the ring capacitor installed,
i.e. a master socket. I have sourced these from Tandy but Maplin should have
something similar. The alternative is to buy a standard master socket
faceplate and make up an rj11 cable and terminate it to the master socket.
Cheers Tom
-----Original Message-----
From: R.P.Ferguson [mailto:Ross.Ferguson@multilayer-communications.com]
Sent: 04 February 2002 14:04
To: ccielab@groupstudy.com
Subject: FXS port and Mod Tap
Hi,
Anyone using a FXS port in the UK with a Mod Tap ? According to the
archives you need to connect to the FXS via one of these devices. However
the FXS has a RJ11 connector, the Mod Tap is RJ45. I have been to 3
different electrical suppliers (RS Components etc.) and none of them have a
converter. How are you expected to get this working ? Make a cable up ?
regards,
Ross.
[GroupStudy.com removed an attachment of type application/ms-tnef which had
a name of winmail.dat]
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:11 GMT-3