From: Troy Rader (troy@xxxxxxxxxx)
Date: Sun Jan 13 2002 - 18:27:32 GMT-3
I've searched the archives and I'm not finding an answer that clears this
issue up for me.
Here's my diagram: (I guess proportional font matters here)
R10---R8---R3---R6---R2---R9---R11---R14---R4
|
|
R5
R10-R8 is RIP
R8-R3-R6 is Area 2
R6-R2 is Area 0
R6-R5 is Area 3
R2-R9-R11 is Area 1
R11-R14 is IGRP
R14-R4 is RIP
Area 3 was the stub and then totally stubby area. I did okay with that.
Area 1 is where I have my NSSA. I understand that my external routes from
R10 are not learned in the NSSA, and that the redist'd routes from R11 and
IGRP are N1 or N2 OSPF NSSA Ext and are propogated throughout OSPF.
However, I'm lost on how to allow R9 and R11 to get to R10 RIP networks
since they are External and not visible in the NSSA. I tried to originate
a default from R2. R6 ended up with a default, but R9 did not.
What's the trick, solution, answer?
TIA,
Troy
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:27 GMT-3