From: Peter van Oene (pvo@xxxxxxxxxxxx)
Date: Sun Jan 13 2002 - 19:35:52 GMT-3
area 1 nssa default-information-originate
At 03:27 PM 1/13/2002 -0600, Troy Rader wrote:
>I've searched the archives and I'm not finding an answer that clears this
>issue up for me.
>
>Here's my diagram: (I guess proportional font matters here)
>
>R10---R8---R3---R6---R2---R9---R11---R14---R4
> |
> |
> R5
>
>R10-R8 is RIP
>R8-R3-R6 is Area 2
>R6-R2 is Area 0
>R6-R5 is Area 3
>R2-R9-R11 is Area 1
>R11-R14 is IGRP
>R14-R4 is RIP
>
>Area 3 was the stub and then totally stubby area. I did okay with that.
>
>Area 1 is where I have my NSSA. I understand that my external routes from
>R10 are not learned in the NSSA, and that the redist'd routes from R11 and
>IGRP are N1 or N2 OSPF NSSA Ext and are propogated throughout OSPF.
>However, I'm lost on how to allow R9 and R11 to get to R10 RIP networks
>since they are External and not visible in the NSSA. I tried to originate
>a default from R2. R6 ended up with a default, but R9 did not.
>
>What's the trick, solution, answer?
>
>TIA,
>Troy
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:27 GMT-3