From: Stephen C. Feldberg (scfeldberg@xxxxxxxxxxx)
Date: Mon Jan 07 2002 - 19:16:01 GMT-3
My mind was thinking summarization- I typed summary-address when I meant
area-range.
Steve
----- Original Message -----
From: "omar guarisco" <oguarisco44@hotmail.com>
To: <scfeldberg@hotmail.com>; <kaykkyu@yahoo.com>; <ccielab@groupstudy.com>
Sent: Monday, January 07, 2002 8:44 PM
Subject: Re: redistribution ospf and igrp
>
> For OSPF, this command summarizes only routes from other routing protocols
that are being redistributed into OSPF a single aggregate entry of LSA type
5
>
> How can you summarize OSPF that is /28 to a /24 with summary address ???
>
> omar
>
>
> >From: "Stephen C. Feldberg" <scfeldberg@hotmail.com>
> >Reply-To: "Stephen C. Feldberg" <scfeldberg@hotmail.com>
> >To: "Yu Kay" <kaykkyu@yahoo.com>, <ccielab@groupstudy.com>
> >Subject: Re: redistribution ospf and igrp
> >Date: Mon, 7 Jan 2002 08:55:22 -0500
> >
> >Use the OSPF summary address command to summarize the OSPF /28 as a /24
on
> >the ASBR. The /24 will then redistribute properly into IGRP.
> >
> >Steve
> >----- Original Message -----
> >From: "Yu Kay" <kaykkyu@yahoo.com>
> >To: <ccielab@groupstudy.com>
> >Sent: Monday, January 07, 2002 4:14 AM
> >Subject: redistribution ospf and igrp
> >
> >
> > > Hi,
> > >
> > > I have a question that if the router (ospf and igrp
> > > running and different snbnet mask, ospf 28 bit and
> > > igrp 24 bit sunbet mask) only can be ASBR (it is
> > > connected at area 1 and IGRP domain, so it cannot add
> > > a dummy loopback to become ABR), how can
> > > redistributed.
> > >
> > > keith
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:19 GMT-3