From: Yu Kay (kaykkyu@xxxxxxxxx)
Date: Mon Jan 07 2002 - 22:44:11 GMT-3
Stephen,
As I write, the router is a ASBR and cannot be a ABR,
it cannot use commnad "area-range"
keith
--- "Stephen C. Feldberg" <scfeldberg@hotmail.com>
wrote:
> My mind was thinking summarization- I typed
> summary-address when I meant
> area-range.
>
> Steve
> ----- Original Message -----
> From: "omar guarisco" <oguarisco44@hotmail.com>
> To: <scfeldberg@hotmail.com>; <kaykkyu@yahoo.com>;
> <ccielab@groupstudy.com>
> Sent: Monday, January 07, 2002 8:44 PM
> Subject: Re: redistribution ospf and igrp
>
>
> >
> > For OSPF, this command summarizes only routes from
> other routing protocols
> that are being redistributed into OSPF a single
> aggregate entry of LSA type
> 5
> >
> > How can you summarize OSPF that is /28 to a /24
> with summary address ???
> >
> > omar
> >
> >
> > >From: "Stephen C. Feldberg"
> <scfeldberg@hotmail.com>
> > >Reply-To: "Stephen C. Feldberg"
> <scfeldberg@hotmail.com>
> > >To: "Yu Kay" <kaykkyu@yahoo.com>,
> <ccielab@groupstudy.com>
> > >Subject: Re: redistribution ospf and igrp
> > >Date: Mon, 7 Jan 2002 08:55:22 -0500
> > >
> > >Use the OSPF summary address command to summarize
> the OSPF /28 as a /24
> on
> > >the ASBR. The /24 will then redistribute
> properly into IGRP.
> > >
> > >Steve
> > >----- Original Message -----
> > >From: "Yu Kay" <kaykkyu@yahoo.com>
> > >To: <ccielab@groupstudy.com>
> > >Sent: Monday, January 07, 2002 4:14 AM
> > >Subject: redistribution ospf and igrp
> > >
> > >
> > > > Hi,
> > > >
> > > > I have a question that if the router (ospf and
> igrp
> > > > running and different snbnet mask, ospf 28 bit
> and
> > > > igrp 24 bit sunbet mask) only can be ASBR (it
> is
> > > > connected at area 1 and IGRP domain, so it
> cannot add
> > > > a dummy loopback to become ABR), how can
> > > > redistributed.
> > > >
> > > > keith
> > > >
> > > >
> > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:19 GMT-3