From: Stephen C. Feldberg (scfeldberg@xxxxxxxxxxx)
Date: Mon Jan 07 2002 - 23:06:24 GMT-3
Yes, I see that now from your original post. How about creating another
OSPF process, summarize the /28 into /24 during redistribution into the
second process using summary-address, then redistribute the route with the
correct length mask from the second OSPF process into IGRP.
Steve
----- Original Message -----
From: "Yu Kay" <kaykkyu@yahoo.com>
To: "Stephen C. Feldberg" <scfeldberg@hotmail.com>; "omar guarisco"
<oguarisco44@hotmail.com>; <ccielab@groupstudy.com>
Sent: Monday, January 07, 2002 8:44 PM
Subject: Re: redistribution ospf and igrp
> Stephen,
>
> As I write, the router is a ASBR and cannot be a ABR,
> it cannot use commnad "area-range"
>
> keith
> --- "Stephen C. Feldberg" <scfeldberg@hotmail.com>
> wrote:
> > My mind was thinking summarization- I typed
> > summary-address when I meant
> > area-range.
> >
> > Steve
> > ----- Original Message -----
> > From: "omar guarisco" <oguarisco44@hotmail.com>
> > To: <scfeldberg@hotmail.com>; <kaykkyu@yahoo.com>;
> > <ccielab@groupstudy.com>
> > Sent: Monday, January 07, 2002 8:44 PM
> > Subject: Re: redistribution ospf and igrp
> >
> >
> > >
> > > For OSPF, this command summarizes only routes from
> > other routing protocols
> > that are being redistributed into OSPF a single
> > aggregate entry of LSA type
> > 5
> > >
> > > How can you summarize OSPF that is /28 to a /24
> > with summary address ???
> > >
> > > omar
> > >
> > >
> > > >From: "Stephen C. Feldberg"
> > <scfeldberg@hotmail.com>
> > > >Reply-To: "Stephen C. Feldberg"
> > <scfeldberg@hotmail.com>
> > > >To: "Yu Kay" <kaykkyu@yahoo.com>,
> > <ccielab@groupstudy.com>
> > > >Subject: Re: redistribution ospf and igrp
> > > >Date: Mon, 7 Jan 2002 08:55:22 -0500
> > > >
> > > >Use the OSPF summary address command to summarize
> > the OSPF /28 as a /24
> > on
> > > >the ASBR. The /24 will then redistribute
> > properly into IGRP.
> > > >
> > > >Steve
> > > >----- Original Message -----
> > > >From: "Yu Kay" <kaykkyu@yahoo.com>
> > > >To: <ccielab@groupstudy.com>
> > > >Sent: Monday, January 07, 2002 4:14 AM
> > > >Subject: redistribution ospf and igrp
> > > >
> > > >
> > > > > Hi,
> > > > >
> > > > > I have a question that if the router (ospf and
> > igrp
> > > > > running and different snbnet mask, ospf 28 bit
> > and
> > > > > igrp 24 bit sunbet mask) only can be ASBR (it
> > is
> > > > > connected at area 1 and IGRP domain, so it
> > cannot add
> > > > > a dummy loopback to become ABR), how can
> > > > > redistributed.
> > > > >
> > > > > keith
> > > > >
> > > > >
> > > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:19 GMT-3