From: Bruce Evry (bruceco@xxxxxxxxxx)
Date: Sun Jan 06 2002 - 13:56:54 GMT-3
> >>From: Ma Gang <matthen@zisco.com.cn>
> >>I got a wounded 2611 router, its config register may be revised by somebody
.
> >>The symptom is
> >>1. It can boot and shows the booting message on the normal 9600/8/N/1
> >>console.
> >>2. It has NO response when you hit the keyboard
> >>3. There is also no reaction when you try to CTRL+BREAK when it is booting
>
Hmmmm...
If it can boot and shows the boot message properly then the baud
rate and other telnet factors must be set about right.
If your scroll lock key is on, then your terminal session may not
allow you to type things in. Turning scroll lock off, if that is the
problem, should return control of your router to you.
This may not be the problem in your case, but I've seen it happen
in classes before. Makes for interesting troubleshooting.
It also could be that your router has entered the Twilight Zone :)
Yours Truly - Bruce Evry
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:17 GMT-3