Re: CLNS routing

From: Peter van Oene (pvo@xxxxxxxxxxxx)
Date: Fri Jan 04 2002 - 10:43:31 GMT-3

• Next message: Bauer, Rick: "RE: OT: back-to-back with SM25-56k4 and wic-1dsu-t1 cards"
• Previous message: Rivron Francois: "RE: Tacacs+ config problem with Reverse telnet"
• Maybe in reply to: CCIE Lab: "CLNS routing"
• Next in thread: Peter van Oene: "Re: CLNS routing"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Forgot your last question. You can leave CLNS routing off in all
cases. Your router will route IP in ISIS quite well without it.

Pete

At 08:16 PM 1/3/2002 -0800, you wrote:
>I'm confused about the difference between the
>Inegrated ISIS routing and the Multi-area ISIS
>routing?
>and their relations with enabling the CLNS routing on
>the router?
>Could anyone give some explanations?
> TIA
>
>
>

• Next message: Bauer, Rick: "RE: OT: back-to-back with SM25-56k4 and wic-1dsu-t1 cards"
• Previous message: Rivron Francois: "RE: Tacacs+ config problem with Reverse telnet"
• Maybe in reply to: CCIE Lab: "CLNS routing"
• Next in thread: Peter van Oene: "Re: CLNS routing"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:15 GMT-3