From: Rivron Francois (Francois.Rivron@xxxxxxxxx)
Date: Fri Jan 04 2002 - 10:43:52 GMT-3
Hello,
Have you tried this :
aaa authentication login revtelnet none
line aux 0 (or the serial interface where reverse telnet is used)
login authentication revtelnet
> -----Message d'origine-----
> De: clingamgunta@energis.co.uk [SMTP:clingamgunta@energis.co.uk]
> Date: vendredi 4 janvier 2002 10:43
> @: ccielab@groupstudy.com
> Objet: Tacacs+ config problem with Reverse telnet
>
> Hi,
> Our requirement is not to have Tacacs+ authentication for reverse telent (
> have
> terminal servers connected to Serial devices). However when we add the
> config
> "aaa new model", it is asking for user name and password for every telnet
> and
> reverse telnet. I thought that all telnets no matter what port number is
> will go
> through vty lines only and authentication rules will be applied to reverse
> telnet also as configured under vty lines., however with out tacacs+, even
> if
> there was a password under vty lines, it is not challenged while doing
> reverse
> telnet. Has any one come across such problem?
> Thanks
> Chandra #8052
>
>
>
>
> **************************************************************************
> ******************************
> This e-mail is from Energis plc, 50 Victoria Embankment, London, EC4Y 0DE,
> United
> Kingdom, No: 2630471.
>
> This e-mail is confidential to the addressee and may be privileged. The
> views
> expressed are personal and do not necessarily reflect those of Energis. If
> you are not
> the intended recipient please notify the sender immediately by calling our
> switchboard on
> +44 (0) 20 7206 5555 and do not disclose to another person or use, copy or
> forward
> all or any of it in any form.
>
> **************************************************************************
> ******************************
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:15 GMT-3