Aux port issue

From: Ron Royston (ccie6824@xxxxxxxxxxx)
Date: Thu Jan 03 2002 - 17:41:58 GMT-3

• Next message: George Hansen: "Re: OT: back-to-back with SM25-56k4 and wic-1dsu-t1 cards"
• Previous message: tom cheung: "OT: 2504 for sale"
• Next in thread: George Hansen: "Re: Aux port issue"
• Maybe reply: George Hansen: "Re: Aux port issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
My config looks like:

Denver_Rtr#sho run | begin line aux
line aux 0
password cisco
login
modem InOut
modem autoconfigure discovery
transport input all
speed 57600
flowcontrol hardware

I do:

Denver_Rtr#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Denver_Rtr(config)#line aux 0
Denver_Rtr(config-line)#speed 38400
Denver_Rtr(config-line)#end
Denver_Rtr#
00:11:55: %SYS-5-CONFIG_I: Configured from console by avnet on console
Denver_Rtr#wr
Building configuration...
[OK]
Denver_Rtr#sho line 5
   Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
Int
* 5 AUX 38400/38400 - inout - - - 0 0 0/0
-

...then after a second or two, the router changes the speed on the line to a
seemingly random number (and screws up the dialin capability). When I issue
a "show line" it gives me a different speed each time! What the hell is
that all about??? Anyone???

Denver_Rtr#sho line
   Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
Int
* 0 CTY - - - - - 0 0 0/0
-
* 5 AUX 300/300 - inout - - - 0 0 0/0
-
     6 VTY - - - - - 0 0 0/0
-
     7 VTY - - - - - 0 0 0/0
-
     8 VTY - - - - - 0 0 0/0
-
     9 VTY - - - - - 0 0 0/0
-
    10 VTY - - - - - 0 0 0/0
-

Line(s) not in async mode -or- with no hardware support:
1-4

Denver_Rtr#sho line
   Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
Int
* 0 CTY - - - - - 0 0 0/0
-
* 5 AUX 115200/115200- inout - - - 0 0 0/0
-
     6 VTY - - - - - 0 0 0/0
-
     7 VTY - - - - - 0 0 0/0
-
     8 VTY - - - - - 0 0 0/0
-
     9 VTY - - - - - 0 0 0/0
-
    10 VTY - - - - - 0 0 0/0
-

Line(s) not in async mode -or- with no hardware support:
1-4

Denver_Rtr#sho line
   Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
Int
* 0 CTY - - - - - 0 0 0/0
-
* 5 AUX 38400/38400 - inout - - - 0 0 0/0
-
     6 VTY - - - - - 0 0 0/0
-
     7 VTY - - - - - 0 0 0/0
-
     8 VTY - - - - - 0 0 0/0
-
     9 VTY - - - - - 0 0 0/0
-
    10 VTY - - - - - 0 0 0/0
-

Line(s) not in async mode -or- with no hardware support:
1-4

• Next message: George Hansen: "Re: OT: back-to-back with SM25-56k4 and wic-1dsu-t1 cards"
• Previous message: tom cheung: "OT: 2504 for sale"
• Next in thread: George Hansen: "Re: Aux port issue"
• Maybe reply: George Hansen: "Re: Aux port issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:15 GMT-3