Re: ospf area 0 range doesn't work

From: BLKTALN@xxxxxxx
Date: Sat Dec 29 2001 - 17:26:17 GMT-3

• Next message: Jason Gardiner: "Re: How to build a Loopback Plug for a TR-Interface`"
• Previous message: Michael Popovich: "BGP as-path access-lists"
• Maybe in reply to: Kevin: "ospf area 0 range doesn't work"
• Next in thread: tom cheung: "Re: ospf area 0 range doesn't work"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I had bad experiences with 12.0.1T which doesn't put the summarized address int
o the routing table when running ospf, it is a open caveat, work around was sug
gested to clear ospf process, or clear ip route, which either one didn't solve
the problem. I would suggest look into the caveat on cco and see if you can fin
d any bugs...

• Next message: Jason Gardiner: "Re: How to build a Loopback Plug for a TR-Interface`"
• Previous message: Michael Popovich: "BGP as-path access-lists"
• Maybe in reply to: Kevin: "ospf area 0 range doesn't work"
• Next in thread: tom cheung: "Re: ospf area 0 range doesn't work"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:49 GMT-3