From: tom cheung (tkc9789@xxxxxxxxxxx)
Date: Sat Dec 29 2001 - 18:23:58 GMT-3
A previous post by Brian Hescock of Cisco suggested that this is not a bug.
This is actually a bug now fixed in 12.1 mainline code. You may want to
search the archives for that post.
>From: BLKTALN@aol.com
>Reply-To: BLKTALN@aol.com
>To: <kevin@btamail.net.cn>, <ccielab@groupstudy.com>
>Subject: Re: ospf area 0 range doesn't work
>Date: Sat, 29 Dec 2001 15:26:17 EST
>
>I had bad experiences with 12.0.1T which doesn't put the summarized address
>into the routing table when running ospf, it is a open caveat, work around
>was suggested to clear ospf process, or clear ip route, which either one
>didn't solve the problem. I would suggest look into the caveat on cco and
>see if you can find any bugs...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:49 GMT-3