From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Thu Dec 27 2001 - 02:20:02 GMT-3
You probably switched the interface cable from a DTE ant that end to a DCE
for another lab scenario etc. A simple shut no-shut on the interface should
take care of it.
----- Original Message -----
From: "wen jia yang" <tonyblair@etang.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, December 26, 2001 5:05 PM
Subject: still serial interface,this time not problems but a question
> sometimes when i issue the command clock rate 64000(or any others)
> there is a warning preventing this command since that was a DTE
interface(please notice i use RS-232 instead of v.35,for the first one is
cheaper in Beijing,hehe:)
>
> but some other time when I do the same,there is no such warning,and it
just accepts the command,althought it was a DTE interface.
>
> Is it because the IOS is different?
> I still use IOS 12.0.5(T)for practicing the basics,but it has the warning.
>
> For those who had very old model like Cisco 3104 Router,please check,I
tried mine,some of them has the warning,some not.
>
>
> Can anyone help?Thanks in advance.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:48 GMT-3