RE: OT : Drop and Insert

From: Mason Harris (maharris@xxxxxxxxx)
Date: Thu Dec 20 2001 - 03:14:24 GMT-3

• Next message: Ma Gang: "To whom attened the Networkers 2001 in China"
• Previous message: Christopher Jarosz: "Re: 1-day lab format"
• Maybe in reply to: Ron Royston: "OT : Drop and Insert"
• Next in thread: Ron Royston: "RE: OT : Drop and Insert"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Ron--

Here you go:

! Below config is for data and Drop & Insert
controller T1 0/0
 framing esf
 clock source internal
 linecode b8zs
 channel-group 0 timeslots 1-12 speed 64
 tdm-group 1 timeslot 13-24

! Below is only for Drop & Insert
controller T1 0/1
 framing esf
 clock source internal
 linecode b8zs
tdm-group 1 timeslot 13-24

! Below command is for tdm-group
connect 1 T1 0/0 1 T1 0/1 1
interface Serial0/0:0
 ip address 1.0.1.1 255.255.255.0

and off of CCO for more detail on the commands: (watch for url wrap)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/120t7/t1_mf_t6.htm#xtocid1046213

Good luck,
Mason

CCIE #5916
R&S, SNA-IP, ISP-Dial

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Ron Royston
Sent: Wednesday, December 19, 2001 4:09 PM
To: ccielab@groupstudy.com
Subject: OT : Drop and Insert

Anyone got a sample config for a VWIC-2MFT-T1-D1 configuration for drop and
insert of some voice channels off a channelized T1 circuit?

• Next message: Ma Gang: "To whom attened the Networkers 2001 in China"
• Previous message: Christopher Jarosz: "Re: 1-day lab format"
• Maybe in reply to: Ron Royston: "OT : Drop and Insert"
• Next in thread: Ron Royston: "RE: OT : Drop and Insert"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:45 GMT-3