From: Bryan Osoro (bosoro@xxxxxxxxxxx)
Date: Wed Dec 19 2001 - 11:26:12 GMT-3
Here is a link that shows how you can tunnel over the Aux port.
I have done it, and this way seems to have worked the best out of any Frame
tunneling I've done
Bryan Osoro CCIE #8548
Network Engineer
Salt Lake 2002 Winter Olympics
>From: "Burgstaller, Oliver" <BurgstallerO@messe-duesseldorf.de>
>Reply-To: "Burgstaller, Oliver" <BurgstallerO@messe-duesseldorf.de>
>To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
>CC: "'tobccie2002@yahoo.com'" <tobccie2002@yahoo.com>
>Subject: AW: how to config 2x2500routers as a f.r.switch?
>Date: Wed, 19 Dec 2001 11:40:32 +0100
>
>hello tobccie2002,
>
>look at
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/wan_
>c/wcdfrely.htm#xtocid2218549
>
>and use switching over an IP tunnel example
>
>
>
>-----Urspr|ngliche Nachricht-----
>Von: tobccie2002@yahoo.com [mailto:tobccie2002@yahoo.com]
>Gesendet am: Mittwoch, 19. Dezember 2001 01:00
>An: ccielab@groupstudy.com
>Betreff: how to config 2x2500routers as a f.r.switch?
>
>hi,all
>this my first time to send mail to u.
>could anybody help me?
>i heard that u can config two 2500(2 serial interfaces each) using ethernet
>back-to-bcak,and u can take that as a frame-relay switch with 4 serial
>interfaces.i've been looking for the answer,but can't get it.
>so would u plz tell me how and send me the config file?
>thanks anyway
> tobccie2002@yahoo.com
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:45 GMT-3