From: Bryan Osoro (bosoro@xxxxxxxxxxx)
Date: Wed Dec 19 2001 - 13:46:53 GMT-3
It helps if I actually put the link in the email
http://www.5g.net/configs/frameswitch.htm
Bryan
>From: "Bryan Osoro" <bosoro@hotmail.com>
>Reply-To: "Bryan Osoro" <bosoro@hotmail.com>
>To: ccielab@groupstudy.com
>Subject: Re:how to config 2x2500routers as a f.r.switch?
>Date: Wed, 19 Dec 2001 07:26:12 -0700
>
>Here is a link that shows how you can tunnel over the Aux port.
>
>I have done it, and this way seems to have worked the best out of any Frame
>tunneling I've done
>
>
>Bryan Osoro CCIE #8548
>Network Engineer
>Salt Lake 2002 Winter Olympics
>
>
>>From: "Burgstaller, Oliver" <BurgstallerO@messe-duesseldorf.de>
>>Reply-To: "Burgstaller, Oliver" <BurgstallerO@messe-duesseldorf.de>
>>To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
>>CC: "'tobccie2002@yahoo.com'" <tobccie2002@yahoo.com>
>>Subject: AW: how to config 2x2500routers as a f.r.switch?
>>Date: Wed, 19 Dec 2001 11:40:32 +0100
>>
>>hello tobccie2002,
>>
>>look at
>>http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/wan_
>>c/wcdfrely.htm#xtocid2218549
>>
>>and use switching over an IP tunnel example
>>
>>
>>
>>-----Urspr|ngliche Nachricht-----
>>Von: tobccie2002@yahoo.com [mailto:tobccie2002@yahoo.com]
>>Gesendet am: Mittwoch, 19. Dezember 2001 01:00
>>An: ccielab@groupstudy.com
>>Betreff: how to config 2x2500routers as a f.r.switch?
>>
>>hi,all
>>this my first time to send mail to u.
>>could anybody help me?
>>i heard that u can config two 2500(2 serial interfaces each) using
>>ethernet
>>back-to-bcak,and u can take that as a frame-relay switch with 4 serial
>>interfaces.i've been looking for the answer,but can't get it.
>>so would u plz tell me how and send me the config file?
>>thanks anyway
>> tobccie2002@yahoo.com
>>
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:45 GMT-3