From: EA Louie (elouie@xxxxxxxxx)
Date: Sat Dec 15 2001 - 19:05:46 GMT-3
Annu - how much flash do you have on the router? can you include a sh ver
and sh flash chip in your reply?
-e-
----- Original Message -----
From: "Annu" <annu_roopa@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, December 15, 2001 1:33 PM
Subject: Cisco 2514 Upgrade Problem
> Group,
>
> I am trying to upgrade a Cisco 2514 from 12.0 code to
> 12.1 as the router has been rebooting itself every
> other hour and also reboots when policy routing or
> Offset list is configured.
>
> I get the following error irrespective of how i
> upgrade - from Boot mode or ROM monitor mode ? Is the
> FLASH corrupted or what is the remedy to this ?
>
> -------
> >b c2500-js56i-l.120-5.bin 192.1.1.5
> %SYS-4-CONFIG_NEWER: Configurations from version 12.0
> may not be correctly understood.
> Loading c2500-js56i-l.120-5.bin .from 192.1.1.5 (via
> Ethernet0): !!!!!!!!!!!!!!!
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> !!!!!!!!!!!!!!!!!!!!!!!!Parity (control reg=0x8318)
> Error, address: 0xE022D0 at 0x1098CE4 (PC)
>
> System Bootstrap, Version 11.0(10c), SOFTWARE
> Copyright (c) 1986-1996 by cisco Systems
> 2500 processor with 14336 Kbytes of main memory
>
> %SYS-4-CONFIG_NEWER: Configurations from version 12.0
> may not be correctly under
> stood.
>
> Thanks for ut ime and answers.
> Annu.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:43 GMT-3